If anyone is in need of a freshly painted, mostly functional tire machine, let me know....
By the way, the new machine will not be getting a paint job....It's scratched up, dirty look is just perfect....
Thursday, September 18, 2014
Coats 40/40 project....
About a year ago, we acquired this 40/40 tire machine and I had the brilliant idea to tear it all apart and paint it up to make it look pretty for the shop. Well, what happened was that it sat apart for almost the entire time and changed only one tire. In the meantime, we came across a newer rim clamp machine that is fully functional and needs absolutely nothing, so now.....this thing has to go because it is in the way.
If anyone is in need of a freshly painted, mostly functional tire machine, let me know....
By the way, the new machine will not be getting a paint job....It's scratched up, dirty look is just perfect....
If anyone is in need of a freshly painted, mostly functional tire machine, let me know....
By the way, the new machine will not be getting a paint job....It's scratched up, dirty look is just perfect....
Moving day....yet again....
Finally got the workhorse lathe of the shop back into it's new home. Wow was this thing heavy, it was all that my 1/2 ton truck could do to pull it around...probably had the trailer overloaded just a bit...
Now that this thing is in, all of the other equipment can finally fit into place and hopefully the shop can become a much less cluttered mess...
Maybe this organ repair might becoming a thing....
....uhhhh, probably not. I can't imagine there is much demand for a a key pusher while the true organ repairer is working.
Regardless, I was interested in lending a hand on this particular job because the organ in question was all mechanical. The amount of linkages is absolutely astounding. As a key is pressed on the console, it activates a series of rods and bell cranks to open a mechanical flapper on a pipe up to 20 ft away. With all of the points of movement, there is absolutely no play in any of it.
This organ began construction in 1972 in Germany and took 2 years to complete. It apparently is 1 of 5 like it in the U.S. Once shipped over here, it took another 3 weeks to install it.
Here is a picture of some on the linkages responsible for making this thing work. These are just for the key board, there is another set buried beneath the console that are operated by the foot pedals. This thing is truly a work of art...
Regardless, I was interested in lending a hand on this particular job because the organ in question was all mechanical. The amount of linkages is absolutely astounding. As a key is pressed on the console, it activates a series of rods and bell cranks to open a mechanical flapper on a pipe up to 20 ft away. With all of the points of movement, there is absolutely no play in any of it.
This organ began construction in 1972 in Germany and took 2 years to complete. It apparently is 1 of 5 like it in the U.S. Once shipped over here, it took another 3 weeks to install it.
Friday, September 5, 2014
Chevy Vortec...made with real tornadoes...
Ever since I finally brought the Nash home, I have been experiencing an itch to maybe start working on it. It's been quietly, patiently waiting in the corner for the time to be right to resurrect it from it's current neglected state. Well, that that time might come fairly soon....
First things first, I need to start collecting some parts. I would prefer it not to end up like so many of my other personnel projects spread out over all of the shop waiting on the necessary pieces to magically show up at my doorstep. So, over that last several months, I have been acquiring the necessary pieces that will eventually address the many aspects that I find wrong with the vehicle. Remember, I built the thing when I was 16...I made a lot of mistakes....
One of the aspects that I despised the most was the carburetor. Have driven the car cross county several times, it was a never ending battle to keep the thing running correctly especially at any appreciable elevation. The last time I changed jets somewhere in the mountains of Colorado, I swore that I was going to eventually step it up to the late 20th century and install a fuel injection system.
That was at least 10 years ago, and things change...especially...the availability of newer engines and their donor vehicles. Case in point, I pick this beauty of a truck up for basically scrap price. Its a 1999 Chevy Silverado LS with a 5.3L GM Vortec engine that had been involved in a slight accident that eventually lead to it being totaled.
Now, I have a couple of friends that have done the 5.3L swaps that have been trying to convince me to do it to the Nash. I admit, I was a bit hesitant until I saw this on the Youtubes...warning: it's a bit of crude humor....
So, I had to get me one of those tornadoes under the hood....
Since I had a running, driving donor vehicle, I was able to take everything I needed from the engine to the computer and even the OBDII port off at my leisure and part the rest out before I hauled it to the scrap yard. As it stands right now, there really isn't much left of the thing...apparently the hillbillies around here go crazy for Silverado parts...
I plan on using a 700R4 instead of the stock 4L60E transmission. It's got a mechanical speedometer and it's not completely computer controlled. Regardless, the ECU is going to have to be reprogrammed to do anyway with all of the emissions B.S. so I still have to figure that all out...not to mention that the stock engine harness is a bit overwhelming. So, stay tuned...I'll try and keep a decent step by step review...
First things first, I need to start collecting some parts. I would prefer it not to end up like so many of my other personnel projects spread out over all of the shop waiting on the necessary pieces to magically show up at my doorstep. So, over that last several months, I have been acquiring the necessary pieces that will eventually address the many aspects that I find wrong with the vehicle. Remember, I built the thing when I was 16...I made a lot of mistakes....
One of the aspects that I despised the most was the carburetor. Have driven the car cross county several times, it was a never ending battle to keep the thing running correctly especially at any appreciable elevation. The last time I changed jets somewhere in the mountains of Colorado, I swore that I was going to eventually step it up to the late 20th century and install a fuel injection system.
That was at least 10 years ago, and things change...especially...the availability of newer engines and their donor vehicles. Case in point, I pick this beauty of a truck up for basically scrap price. Its a 1999 Chevy Silverado LS with a 5.3L GM Vortec engine that had been involved in a slight accident that eventually lead to it being totaled.
Now, I have a couple of friends that have done the 5.3L swaps that have been trying to convince me to do it to the Nash. I admit, I was a bit hesitant until I saw this on the Youtubes...warning: it's a bit of crude humor....
So, I had to get me one of those tornadoes under the hood....
Since I had a running, driving donor vehicle, I was able to take everything I needed from the engine to the computer and even the OBDII port off at my leisure and part the rest out before I hauled it to the scrap yard. As it stands right now, there really isn't much left of the thing...apparently the hillbillies around here go crazy for Silverado parts...
I plan on using a 700R4 instead of the stock 4L60E transmission. It's got a mechanical speedometer and it's not completely computer controlled. Regardless, the ECU is going to have to be reprogrammed to do anyway with all of the emissions B.S. so I still have to figure that all out...not to mention that the stock engine harness is a bit overwhelming. So, stay tuned...I'll try and keep a decent step by step review...
Subscribe to:
Posts (Atom)